Updated November 2026
A cap for garden hose is one of the cheapest accessories in the yard, but it does real work. It seals the open end of a hose so water stops dripping, keeps dirt and insects out of the threads, and helps protect the hose from being left under pressure at the spigot. The six picks below were compared on thread standard, material, washer inclusion, pack size and the kind of use each one suits, so you can match a cap to how you actually store and water.
Our top picks at a glance
- 1
TOP CHOICEBest overallBrass 3/4" Hose Cap and Plug Set, 10 PackView on Amazon - 2
TOP CHOICEBest for seasonal storageBrass Male Pipe Plug Outer Garden Hose Male Threaded End Cap Plug, 4 PCSView on Amazon - 3
TOP CHOICEBest budget pickGarden Hose Female End Fitting Cap Set, 20 PackView on Amazon - 4
Best for replacing lost caps2 Pack Garden Hose End Caps with WashersView on Amazon - 5Best for a spare set with washersHourleey Brass Garden Hose End Caps, 4 PackView on Amazon
- 6
Best lightweight option12 Pieces Garden Hose End Caps with Washers, PVC Spigot CapView on Amazon
Almost all of these caps use 3/4-inch garden hose thread (GHT), the standard fitting on North American hoses, faucets and sprinkler connections. Before buying, confirm your hose and spigot are GHT rather than a pipe thread, because the two look similar but do not seal together.
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Brass 3/4″ Hose Cap and Plug Set, 10 Pack | Overall use and multiple faucets | Brass body with 10 caps in one set |
| Brass Male Pipe Plug Outer Garden Hose Male Threaded End Cap Plug, 4 PCS | Seasonal storage | Brass plugs for winter protection |
| Garden Hose Female End Fitting Cap Set, 20 Pack | Budget buyers and large households | Largest pack count in this group |
| 2 Pack Garden Hose End Caps with Washers | Replacing a lost cap | Included washers for a tight seal |
| Hourleey Brass Garden Hose End Caps, 4 Pack | Spare caps for several hoses | Brass caps with four washers |
| 12 Pieces Garden Hose End Caps with Washers, PVC Spigot Cap | Light-duty and lightweight use | PVC construction with washers |
Brass 3/4″ Hose Cap and Plug Set, 10 Pack
Durable brass caps & plugs seal faucets to stop leaks, great for yard irrigation, tap storage & seasonal protection Brass 3/4" GHT Hose Cap & Plug Set, 10 Pack
Best for: Overall use and multiple faucets We also found Garden Watering Equipment: Hoses, Drip and Timers useful on this point.
This set suits gardeners who have several spigots or hoses and want one matched set of caps that can cover all of them, as well as spares for storage.
Key specs:
- 3/4-inch GHT female thread
- Brass construction
- Set of 10 caps and plugs
Pros:
- Brass body is generally more resistant to cracking than plastic
- Large count covers multiple faucets and spares
- Works for both hose-end sealing and faucet storage
Cons:
- Brass is heavier than plastic options
- Owners sometimes report that caps need a firm hand-tightening to seal
Bottom line: A strong choice for households with several hoses or faucets that want consistent, durable caps in one purchase.
Brass Male Pipe Plug Outer Garden Hose Male Threaded End Cap Plug, 4 PCS
Best for: Seasonal storage
Gardeners who shut off outdoor water for winter and want solid brass plugs that stay on the faucet and hose ends without much fuss.
Key specs:
- 3/4-inch male threaded plug style
- Brass material
- Pack of 4
Pros:
- Brass resists weathering and repeated seasonal use
- Simple screw-on design with no moving parts
- Four pieces cover a typical yard setup
Cons:
- Male-threaded design may not suit every female hose end, so check the fitting
- Smaller pack count than some alternatives
Bottom line: Good for storing hoses and spigots over winter, provided you confirm the thread direction matches your fittings.
Garden Hose Female End Fitting Cap Set, 20 Pack
Garden Hose Female End Fitting Cap Set Standard 3/4 Inch GHT 20 Pack Plastic Hose Caps for Garden Hose
Best for: Budget buyers and large households
Anyone who needs a lot of caps on hand, such as landscapers or families with many hoses, will get the most value from this large plastic set.
Key specs:
- 3/4-inch GHT female fitting
- Plastic construction
- Set of 20 caps
Pros:
- Very high count for the number of caps included
- Lightweight and easy to handle
- Good for keeping spares in a tool bin
Cons:
- Plastic can become brittle in prolonged freezing or UV exposure
- Fit can vary slightly between plastic lots, so test one cap first
Bottom line: A practical budget pick for anyone who wants plenty of spares and does not expect the caps to face harsh winters.
2 Pack Garden Hose End Caps with Washers
Best for: Replacing a lost cap
A small, low-commitment pack for replacing a single lost cap or testing a new fitting before buying more.
Key specs:
- 3/4-inch female end cap
- Includes washers
- Pack of 2
Pros:
- Washers included, which helps create a seal
- Small pack avoids surplus
- Good size match for standard hose ends
Cons:
- Only two caps, so it is not ideal for multiple hoses
- Material details are less clear than premium brass sets
Bottom line: Best for a quick replacement rather than a full set.
Hourleey Brass Garden Hose End Caps, 4 Pack
Best for: Spare caps for several hoses
Gardeners with two or three hoses who want brass caps with washers on hand but do not need a large set.
Key specs:
- 3/4-inch female end cap
- Brass construction
- Pack of 4 with 4 washers
Pros:
- Brass body with included washers
- Enough for a typical two- or three-hose setup
- Consistent fit for standard GHT ends
Cons:
- Heavier than plastic caps
- Four caps may run short for large yards
Bottom line: A balanced middle option for households that want durable caps without a bulk purchase.
12 Pieces Garden Hose End Caps with Washers, PVC Spigot Cap
Best for: Light-duty and lightweight use
Suited to gardeners who mainly need caps for warm-season use and want lightweight pieces that are easy to swap between hoses.
Key specs:
- 3/4-inch female end cap
- PVC construction
- Pack of 12 with washers
Pros:
- Lightweight and easy to handle
- Good count for multiple hoses
- Washers included
Cons:
- PVC is less durable than brass in freezing conditions
- Not recommended for permanent outdoor exposure year-round
Bottom line: A sensible choice for warm-climate or seasonal use where weight matters more than long-term toughness.
Buying Guide
Thread type and size
Most US garden hoses and spigots use 3/4-inch garden hose thread (GHT). Check the hose end and faucet before buying. A pipe thread (NPT) of the same nominal size will not seal correctly on a GHT fitting. Male and female threads also differ, so a male plug will not fit a male hose end.
Good picks for this: Garden Hose Female End Fitting Cap Set, 20 Pack; 2 Pack Garden Hose End Caps with Washers
Material: brass versus plastic
Brass caps tend to hold up better under repeated tightening, sunlight and freezing than plastic. Plastic caps are lighter and cheaper to replace, which suits warm climates or caps you change often. If your hoses stay outdoors through winter, brass is the more forgiving choice.
Good picks for this: Brass 3/4″ Hose Cap and Plug Set, 10 Pack; 12 Pieces Garden Hose End Caps with Washers, PVC Spigot Cap
Washers and sealing
A rubber washer inside the cap is what actually stops drips. Check whether washers are included and whether they are replaceable. A cap that sits without a washer will often leak at the threads. If a cap seeps, replace the washer before blaming the cap itself.
Good picks for this: Hourleey Brass Garden Hose End Caps, 4 Pack; 2 Pack Garden Hose End Caps with Washers
Pack size and how many you need
Count your hose ends, spigots and any sprinkler or drip connections. A large pack is useful for landscapers or households with many hoses, while a small pack suits replacing one cap. Buying a few extra gives you spares for fittings that go missing in storage.
Good picks for this: Garden Hose Female End Fitting Cap Set, 20 Pack; Brass 3/4″ Hose Cap and Plug Set, 10 Pack
Use case: storage versus everyday capping
Caps you use every day need to come on and off easily without cracking. Plugs for winter storage can be more substantial and are often made to lock onto a faucet. Decide whether you want a cap for a hose you empty daily or a plug for a spigot you close for the season.
Good picks for this: Brass Male Pipe Plug Outer Garden Hose Male Threaded End Cap Plug, 4 PCS; Hourleey Brass Garden Hose End Caps, 4 Pack
Durability and weather exposure
Expect plastic to become brittle after long UV exposure and freeze-thaw cycles. Brass withstands these conditions better but can corrode in some water chemistries over many years. Inspect caps each spring, looking for cracks, stripped threads or washers that have flattened.
Good picks for this: Brass 3/4″ Hose Cap and Plug Set, 10 Pack; Brass Male Pipe Plug Outer Garden Hose Male Threaded End Cap Plug, 4 PCS
Care and maintenance
Rinse grit from threads before capping. Drain hoses fully before storing them in freezing weather, since trapped water can crack even a durable cap. Replace washers when they harden or show cracks. For a leaking hose end that is beyond a washer fix, consider a dedicated repair fitting instead of a cap; see our guide to Replace End of Garden Hose: 6 Best Repair Fittings Compared (2026).
Good picks for this: 2 Pack Garden Hose End Caps with Washers; Hourleey Brass Garden Hose End Caps, 4 Pack
FAQ
What size is a standard cap for garden hose?
Most residential caps are sized for 3/4-inch garden hose thread (GHT). Check your hose and faucet before buying, because some older or specialty fittings use different threads.
Can I use a pipe plug instead of a garden hose cap?
Not reliably. Pipe threads (NPT) differ from GHT, so a pipe plug may not seal on a hose spigot. Use a cap or plug labeled for garden hose thread.
Why does my hose cap keep leaking?
The most common cause is a worn or missing washer. Check the washer first. If the threads are stripped or cracked, replace the cap.
Should I cap my hose for winter?
Yes, drain the hose and cap or plug the ends, and close the indoor shutoff valve for the spigot if your home has one. Trapped water can freeze and crack the hose or fittings.
Are brass or plastic caps better?
Brass generally lasts longer in sun and freezing weather. Plastic is lighter and works well for warm-season or light-duty use.
How often should I replace hose caps?
Inspect them at the start of each season. Replace caps that are cracked, have stripped threads, or whose washers no longer seal.
Conclusion
For most yards, the brass 10-pack set offers the broadest coverage and durability. Choose the brass plug pack if your priority is winter storage, the large plastic set for budget bulk needs, and the smaller packs when you only need to replace a single cap. Always confirm the thread is 3/4-inch GHT before you buy.
Sources
- Guidance on water conservation and outdoor watering practices (epa.gov)
- Workplace safety information on handling pressurized and hand tools (osha.gov)
- Extension research-based advice on irrigation and hose maintenance (extension.org)
Related reading
- Zero-G Ultra Flexible Durable Garden Hose: 7 Best Picks Compared (2026)
- Zero G Garden Hose: Pros, Cons and How to Use One Well
- Washers for Garden Hose: 7 Best Picks Compared (2026)
- Wall Mounted Garden Hose Reels: A Step-by-Step Installation and Buying Guide
- Wall Mount for Garden Hose: A Step-by-Step Guide to Tidy Storage

Write Your Review
No reviews yet. Be the first to share your experience!