Updated November 2026
A replacement spring for pruning shears is a small, inexpensive part that restores the snap-open action of a worn or broken pruner. Most springs fail from fatigue after years of cutting, so the right replacement depends on your pruner’s brand, model, and spring size. The selection criteria below cover fit and sizing, material, pack count, and whether the spring matches the brand you already own.
Our top picks at a glance
- 1
TOP CHOICEBest overallReplacement Spring for Pruning Shears, Precision Trimming Scissors ParView on Amazon - 2
TOP CHOICEBest for multi-pack spares20 Pack Replacement Springs for Pruners, Springs Suitable for The MultView on Amazon - 3
TOP CHOICEBest for heavy-duty steelReplacement Springs for Hand Pruners, 6cm Standard Fitting Stainless SView on Amazon - 4
Best for Felco 2 ownersFelco 2/91 Replacement Springs Pruners Models, 2-PackView on Amazon - 5
Best for garden-variety spares20 Pack Precision Pruner Replacement Springs for Gardening Pruner ShearsView on Amazon - 6
Best for Felco 6/91 modelsFELCO Pruner Replacement Springs (6/91) – Spare Nickel Plated Spring, 2-PackView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Replacement Spring for Pruning Shears, 2 inch | Overall fit for bypass pruners | Precision trimming part |
| 20 Pack Replacement Springs for Pruners | Keeping spares on hand | Two size 10 sets |
| Replacement Springs for Hand Pruners, 6cm | Heavy-duty pruning work | Stainless steel volute design |
| Felco 2/91 Replacement Springs, 2-Pack | Felco 2 owners | Model-specific fit |
| 20 Pack Precision Pruner Replacement Springs | Multiple garden tools | High-carbon steel, two sizes |
| FELCO Pruner Replacement Springs (6/91), 2-Pack | Felco 6/91 and F-series models | Nickel-plated spring |
Replacement Spring for Pruning Shears, Precision Trimming Scissors Part for Heavy Duty Bypass Pruner, 2 inch
Replacement Spring for Pruning Shears, Precision Trimming Scissors Part for Heavy Duty Bypass Pruner, 2 inch
Best for: Overall fit for bypass pruners
This suits gardeners who want a single, well-sized spring for a general bypass pruner and do not need a multi-pack.
Pros
- Listed at 2 inches, a common size for bypass designs
- Simple one-spring purchase
Cons
- Only one spring per listing, so check your pruner’s spring length first
20 Pack Replacement Springs for Pruners, Springs Suitable for The Multicolour Garden Pruning Shears Set
20 Pack Replacement Springs for Pruners, Springs Suitable for The Multicolour Garden Pruning Shears Set (two size 10 each)
Best for: Keeping spares on hand
Households with several pruners or a shared tool shed will get the most value from a larger count of springs.
Pros
- Twenty springs cover repeated replacements over time
- Two sizes included, ten each
Cons
- Most buyers will only need one or two, so much of the pack may go unused
Replacement Springs for Hand Pruners, 6cm Standard Fitting Stainless Steel Heavy Duty Volute Spring
Replacement Springs for Hand Pruners, 6cm Standard Fitting Stainless Steel Heavy Duty Volute Spring for Pruners Models, Pruning Shears Springs, Spring Scissors Parts & Accessories (Silver, 3)
Best for: Heavy-duty pruning work
Gardeners who cut thicker wood and want a spring that resists corrosion will find this design a practical match.
Pros
- Stainless steel resists rust in damp conditions
- Volute design is a common heavy-duty form
Cons
- Confirm the 6cm length matches your pruner before ordering
Felco 2/91 Replacement Springs Pruners Models, 2-Pack
Best for: Felco 2 owners
This is aimed at people who already own a Felco 2 or a closely related model and want an exact-match part.
Pros
- Model-specific design reduces fitting guesswork
- Two-pack gives a spare
Cons
- Limited to Felco 2/91 compatibility, so it will not fit other brands
20 Pack Precision Pruner Replacement Springs for Gardening Pruner Shears
Ideal replacement parts for garden pruners, high-carbon steel, 2 sizes, 10 pieces per size, silver tone finish 20 Pack Precision Pruner Replacement Springs for Gardening Pruner Shears
Best for: Multiple garden tools
Anyone maintaining a mixed set of hand tools may appreciate a bulk, two-size assortment.
Pros
- High-carbon steel is a common choice for springs
- Two sizes help cover different pruner models
Cons
- Sizing is generic, so measure your existing spring before buying
FELCO Pruner Replacement Springs (6/91) – Spare Nickel Plated Spring, 2-Pack
FELCO Pruner Replacement Springs (6/91) – Spare Nickel Plated Spring for Gardening Shears, Scissors, & Clippers (2-Pack) – Spring for F6, F16, F12, F17, F160S
Best for: Felco 6/91 and F-series models
Owners of Felco F-series pruners who want a brand-matched spring will find this listing directly relevant.
Pros
- Brand-matched part for listed F-series models
- Nickel plating adds corrosion resistance
Cons
- Compatibility is limited to the models named in the listing
Buying Guide
Match the Spring to Your Pruner Brand and Model
Pruner springs are not universal. A spring sized for one brand, such as Felco, may not seat correctly in a pruner from another manufacturer. Check your pruner’s model number or the original spring before ordering, and confirm that the listing names your model.
When a listing gives a spring length or fitting size, measure your old spring and compare. A spring that is too long or too short will either sit loose or put uneven pressure on the blades.
Check the Material and Finish
Springs are typically made from stainless steel, high-carbon steel, or nickel-plated steel. Stainless steel resists rust well in damp garden conditions, while high-carbon steel is strong but can rust if it is not kept dry. Nickel-plated springs offer a middle ground with a protective coating.
Consider where you use your pruners. If you work in wet or humid climates, a corrosion-resistant finish will help the spring last longer between replacements.
Consider the Pack Count
Some listings sell a single spring, while others offer two-packs or larger assortments with several sizes. If you maintain multiple pruners or a shared garden tool set, a larger pack can save you from reordering later. If you only need to repair one tool, a small pack is usually enough.
Buying a spare or two also means you can replace a broken spring quickly during the growing season without waiting for shipping.
Think About Heavy-Duty Use
Pruners used for thick branches or daily professional work put more stress on the spring. For those tasks, look for springs described as heavy duty and check whether the listing mentions the intended tool type, such as bypass pruners or hand pruners.
For light household trimming, a standard spring is typically sufficient and easier to find in a matching size.
Confirm the Replacement Is a Direct Fit
Some springs are sold as generic replacements, while others are made specifically for a named brand. Generic springs can work well if the dimensions match, but brand-specific springs are the safer choice when your pruner has a proprietary design. Reading the listing closely will tell you which type you are buying.
FAQ
How do I know when my pruner spring needs replacing?
A spring that needs replacing usually feels weak, fails to open the blades fully, or has visible cracks, rust, or a bent shape. The blades may also stay closed or fail to spring back after each cut. Replacing a worn spring is often faster and cheaper than replacing the whole pruner.
Can I use any spring for my pruning shears?
It is best to use a spring that matches your pruner’s brand, model, and size. A spring that is the wrong length or tension can affect how the blades close and may cause uneven wear. Check the listing’s compatibility details before buying.
Do I need special tools to install a replacement spring?
Most pruner springs can be installed with basic hand tools, though some designs require removing a screw or bolt to access the spring. Follow the manufacturer’s instructions for your model if you have them. Work slowly, since springs can slip and snap out under tension.
How long do replacement springs usually last?
Lifespan depends on how often you use your pruners, the type of material you cut, and how well you maintain the tool. Keeping blades clean and dry will help the spring last longer. Inspect the spring periodically during heavy use seasons.
Is a stainless steel spring better than a nickel-plated one?
Stainless steel generally offers stronger rust resistance, which is useful in damp conditions. Nickel-plated springs can also perform well, especially for dry-climate or occasional use. The better choice depends on your environment and how often you use your tools.
Conclusion
If you want a dependable single spring for everyday pruning, the top-rated pick in this roundup is a good starting point. For gardeners who maintain several tools or want spares on hand, the multi-pack options offer better value. Heavy-duty users should choose a steel spring designed for frequent, demanding cuts.
Before you buy, confirm your pruner’s brand and model so the replacement fits correctly. A well-matched spring is a small expense that can extend the life of a tool you already trust.
