Updated November 2026
Owners of older Troy-Bilt tillers often need to know which of the old troy-bilt tiller models they have, and which replacement parts still fit them. This list covers the belts and carburetors most commonly searched for on these machines. Selection criteria were fit to older tiller designs, the specific model or serial range each part is listed for, how well the part matches its original function, and how often owners report it fitting without modification.
Our top picks at a glance
- 1
TOP CHOICEBest overallTroy-Bilt MTD Four Speed Horse Models 9245 GW-56035 Replacement Tiller Drive BeltView on Amazon - 2
TOP CHOICEBest for carburetor repairCarburetor for Troy-Bilt Pony Model: 15008 Tiller CarbView on Amazon - 3
TOP CHOICEBest for a spare-belt kit2 Pack GW-9245 Replacement Tiller Drive Belt for Troy-Bilt MTD Four Speed Horse ModelsView on Amazon - 4
Best for 5hp Versa modelsFor Troy Bilt 5hp Versa Tiller Model 12168View on Amazon - 5
Best for 2-speed horse tillersFit for Troy-Bilt 2 Speed Horse Tiller Models, Serial Numbers 1001 to 314150View on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| GW-9245 Replacement Tiller Drive Belt | Four-speed horse models | 1/2 x 22.5 inch belt |
| Carburetor for Troy-Bilt Pony Model 15008 | Pony model carb repair | Model-specific carburetor |
| 2 Pack GW-9245 Replacement Tiller Drive Belt | Keeping a spare on hand | Two belts per pack |
| Troy Bilt 5hp Versa Tiller Model 12168 | Versa 5hp tiller owners | Listed for model 12168 |
| Fit for Troy-Bilt 2 Speed Horse Tiller Models | Two-speed horse tillers | Serial range 1001 to 314150 |
Troy-Bilt MTD Four Speed Horse Models 9245 GW-56035 Replacement Tiller Drive Belt
GW-9245 Replacement Tiller Drive Belt fits Troy-Bilt MTD Four Speed Horse Models 9245 GW-56035 Lawn Mower 1/2-Inch X 22-1/2-Inch
Best for: Four-speed horse models that need a drive belt replaced.
This is the right starting point for owners whose tiller drive belt has cracked, stretched or slipped under load. The listing specifies a 1/2-inch by 22.5-inch belt sized for the 9245 and GW-56035 family.
Pros
- Listed dimensions match the original belt specification.
- Covers several part numbers in one listing.
Cons
- Fit should be confirmed against your part number before ordering.
Carburetor for Troy-Bilt Pony Model: 15008 Tiller Carb
Best for: Carburetor repair on Pony model tillers.
Suited to owners whose engine runs rough, stalls at idle or floods after sitting. Match the model number on your engine before buying.
Pros
- Model-specific listing reduces guesswork.
- Replaces a common failure point on older engines.
Cons
- Carburetor work usually requires cleaning the fuel system too.
2 Pack GW-9245 Replacement Tiller Drive Belt for Troy-Bilt MTD Four Speed Horse Models
2 Pack GW-9245 Replacement Tiller Drive Belt for Troy-Bilt MTD Four Speed Horse Models 9245 GW-56035 954-04070 954-04070A Lawn Mower (1/2" X 22.5")
Best for: Keeping a spare belt on hand for a four-speed horse tiller.
Useful for owners who work their tiller hard or who want a backup before a busy planting season.
Pros
- Two belts per pack gives you a spare.
- Same 1/2 x 22.5 inch sizing as the single-belt listing.
Cons
- Only useful if your model takes this belt size.
For Troy Bilt 5hp Versa Tiller Model 12168
Best for: Owners of 5hp Versa tillers, model 12168.
Intended for the Versa line specifically, so it suits owners who have confirmed their model number from the data plate.
Pros
- Named for a specific model number.
- Targets a 5hp engine platform.
Cons
- Limited to one model family, so it won’t suit other tillers.
Fit for Troy-Bilt 2 Speed Horse Tiller Models, Serial Numbers 1001 to 314150
Fit for Troy-Bilt 2 Speed Horse Tiller Models, Serial Numbers 1001 to 314150,Transmission Length: 22 inches,Width: 1/2 inch 2Pcs GW-1128 Lawn Mower Drive Belt,Replace#1128 GW-1128-1 1128-1
Best for: Two-speed horse tillers within the listed serial range.
Best for owners whose serial number falls between 1001 and 314150 and who need a GW-1128 style drive belt.
Pros
- Serial range is stated, which helps confirm fit.
- Two belts included.
Cons
- Fit depends on the serial number matching the stated range.
Buying Guide
Identify your model and serial number
Find the data plate on the tiller frame or engine and note the model and serial number. Most old troy-bilt tiller models share parts across a family, so these two numbers narrow your search fast.
Check the belt dimensions
Drive belts are usually listed by width, length and part number. Measure the old belt or compare the stamped numbers before ordering.
Decide between a single part and a spare set
If your tiller is used seasonally, a spare belt avoids a stalled project mid-season. Keep the spare stored flat and away from heat.
Match the carburetor to the engine
Carburetors vary by engine family, so confirm the engine model before buying. Clean the fuel lines when you replace the carb.
Good picks for this: GW-9245 Replacement Tiller Drive Belt and Carburetor for Troy-Bilt Pony Model
FAQ
How do I find out which Troy-Bilt tiller model I have?
Check the metal plate or decal on the tiller housing, which usually lists the model number and serial number. Compare the serial number against the serial range listed for each replacement part to confirm compatibility.
Will a replacement drive belt fit any older Troy-Bilt tiller?
Not necessarily. Drive belts are sized by length and width and are tied to specific model families, so a belt listed for one transmission may not fit another. Always confirm the model number and belt dimensions before you order.
Why does a carburetor need to match the engine exactly?
The carburetor has to match the engine’s displacement, fuel inlet, and mounting pattern to meter fuel and air correctly. A mismatched carburetor can cause hard starting, rough running, or poor performance.
Is it better to buy a single belt or a spare set?
A single belt works if you only need a one-time repair. A spare set makes sense if you use the tiller often or want a backup on hand, since belts on older machines wear over time.
Can I use these parts on a tiller that is still under warranty?
Aftermarket parts may affect warranty coverage, so check your warranty terms before installing non-original components. For machines out of warranty, these replacement parts are a common and practical option.
Should I have a small engine technician install the carburetor?
If you are comfortable with basic small-engine work and have the right tools, you can often replace a carburetor yourself by following the engine manual. If you are unsure about fuel lines, linkages, or adjustments, a technician can save you time and prevent mistakes.
Conclusion
If you need a straightforward belt replacement for a common Troy-Bilt model, the GW-9245 drive belt is the best starting point, and a spare pack suits owners who want a backup. For engine trouble on a Pony-model tiller, the matching carburetor is the right choice.
Before buying, confirm your exact model number and serial range so you choose a part that fits your machine.
Related reading
- 4 Best Older Troy-Bilt Tiller Models for Home Gardens (2026)
- Troy Bilt Super Bronco Rear Tine Tiller: Setup, Use and Care Guide
- Troy Bilt Horse Tiller Parts: How to Find and Replace Them
- Parts for Troy-Bilt Tiller: How to Find, Identify and Replace Them
- Mtd Troy-bilt Tiller Parts: A Practical Guide (2026)
