Updated November 2026
Long tree pruning shears let you remove small branches and deadwood from upper limbs without a ladder. The right pair has a handle long enough to reach your target, blades sized for the wood you actually cut, and a cutting mechanism that won’t crush or tear the branch. This guide explains how to choose long tree pruning shears, how to make clean cuts at height, and how to avoid the mistakes that damage trees or hurt you.
Choose the Right Length and Cutting Capacity
Most long-handled tree shears fall into a range of roughly 4 to 8 feet when extended. Measure the highest branch you need to reach from the ground, then add about 2 feet of working room so you can position the head comfortably. Check the rated cutting capacity as well. Many manufacturers specify a maximum diameter, often around 1 to 1-1/4 inches for the bypass style; anything thicker belongs to a pruning saw or a pole saw.
Shopping for one? See our guide: 3 Best Milwaukee M18 Brushless Telescoping Pole Pruning Shears (2026).
Pick the Right Blade Style
Bypass blades work like scissors, with one curved blade sliding past a straight one. They make clean, living-wood cuts and are the standard choice for healthy growth. Anvil blades close onto a flat surface and are better suited to dead wood, but they can crush green stems. Most gardeners do best with bypass heads on long-handled shears, reserving anvil styles for brittle deadwood.
How to Make a Clean Cut at Height
- Inspect the branch from below. Look for the branch collar, the slightly swollen ring where the limb joins the trunk or a larger branch.
- Position the head about 1/4 inch outside the collar. Do not cut flush against the trunk and do not leave a long stub.
- Make the cut with one smooth squeeze. If the branch resists, reposition rather than forcing the blades, which can twist the cut and tear bark.
- For larger limbs, use an undercut first, about one-third of the way through from below, then finish from above. This prevents the bark from peeling down the trunk.
- Check the cut surface. It should be smooth and angled slightly away from the bud you’re keeping.
Work Safely From the Ground
Long shears are designed to be used from the ground, and that is where they should stay. Stand with your feet apart, keep your head turned to watch for falling debris, and never reach over your head with the shears above shoulder height for long periods. Wear safety glasses, because snapping twigs can spring back. Keep power lines in mind: never use any metal-shafted pruner near overhead wires. If a branch is large, leaning on a ladder, or touching a wire, call a certified arborist and let them handle it.
Tools and Supplies Checklist
- Long tree pruning shears with bypass blades
- Safety glasses and gloves
- Sharpening file or stone
- Rubbing alcohol or a 10 percent bleach solution for disinfecting blades
- Clean cloth and light machine oil
Common Mistakes
- Cutting branches thicker than the rated capacity, which strains the pivot and leaves ragged wounds.
- Pruning in wet weather, when fungal spores spread more easily.
- Removing more than about a quarter of a tree’s live canopy in one season.
- Letting dull blades crush stems instead of slicing them.
- Forgetting to disinfect between trees, which can carry disease from one plant to another.
Recommended Gear
- Telescoping long-reach bypass shears help you adjust height without carrying several tools. View on Amazon
- A fine sharpening file keeps bypass edges clean so cuts heal faster. View on Amazon
- Safety glasses protect your eyes from snapping branches overhead. View on Amazon
FAQ
How thick a branch can long tree pruning shears cut?
Most bypass long-reach shears are rated for branches up to about 1 to 1-1/4 inches in diameter. Check the manufacturer’s stated capacity, and use a pruning saw for anything thicker.
When is the best time to prune with long shears?
Prune on dry days, and for most trees, late winter or early spring while the tree is dormant works well. Remove dead or damaged wood at any time of year.
Do I need to sharpen long tree pruning shears?
Yes. Sharpen the cutting edge when it no longer slices cleanly, typically once or twice a season for regular use. A sharp blade makes a cleaner wound that heals faster.
Conclusion
Choose long tree pruning shears by matching reach and cutting capacity to the branches you work on, and stick with bypass blades for living wood. Cut just outside the branch collar, work from the ground, and keep blades sharp and clean. For limbs beyond the shears’ capacity or anything near power lines, consult a certified arborist.

Write Your Review
No reviews yet. Be the first to share your experience!